ARM® Embedded System-on-Module MODM7AE70


NetBurner’s ARM® Cortex®-powered Ethernet System-on-Module is an IoT device platform containing everything needed to add secure, industrial-quality IoT, network control and monitoring to nearly any smart application or product design.

New to  this embedded system-on-module? Get started with a development kit!




MODM7AE70 Datasheet 606.57 KB 598 downloads

The ARM® Cortex®-powered NetBurner Ethernet System-on-Module is a device containing...

ARM® Embedded System-on-Module MODM7AE70

Need a high-performing and reliable ARM® embedded IoT device for secure automation and industrial IoT applications? For a very low price point, this ARM® Cortex-M7 embedded system-on-module (SOM) solves the problem of securely network-enabling devices with 10/100 Ethernet, including those requiring SSL/TLS, machine-to-machine (M2M) protocols, digital, analog and serial control, and much more. The product can also be used as an edge node microcontroller, edge processor or IoT gateway.

Microchip®/Atmel® ARM® processors are combined with NetBurner’s acclaimed reliability and ease-of-use to get you a solution you can depend on.

IoT Device Platform Overview

  • Microchip®/Atmel® SAM E70 32-bit ARM® Cortex-M7 300-MHz processor
  • Floating point unit (FPU) and Digital Signal Processor (DSP) for high-precision, accelerated data processing
  • Optimized Real Time Operating System (RTOS)
  • Low-power / High Energy Efficiency
  • Flexible memory, Memory Protection Unit (MPU) and system peripherals
  • 2MBytes embedded flash and 8MBytes SDRAM
  • Single and double precision hardware Floating Point Unit (FPU)
  • CMOS image sensor interface
  • Watchdog Timer, Real-time Clock, and Temperature Sensor
  • Industrial temperature range (-40°C to 85°C)
  • Embedded development kit available
  • Optional WiFi available

Embedded SOM Connectivity and Interface

  • 10/100 Mbps Ethernet with IEEE1588 PTP frames and 802.3az Energy-efficiency support
  • 12-bit ITU-R BT 601/656 Image Sensor Interface (ISI)
  • Up to 7 UARTs, 3 TWIHS / I2C, 2 CAN, 4 SPI
  • Quad I/O Serial Peripheral Interface (QSPI) interfacing
  • High-speed Multimedia Card Interface (HSMCI) (SDIO/SD Card/e.MMC)̶ Serial Synchronous Controller (SSC) with I2S and TDM support
  • 16-bit address and data bus with 5 chip selects
  • 11 analog-to-digital converters (ADC)
  • 1 12-bit 1Msps-per-channel Digital-to-Analog Controller (DAC) with differential and oversampling modes
  • 12 16-bit Pulse Width Modulators (PWM) with outputs
  • Up to 53 GPIO lines with external interrupt capability (edge- or level-sensitivity), debouncing, glitch filtering and on-die Series Resistor Termination
Try out our IoT development kit! The best way to get started.


Read the ARM® Embedded System-on-Module MODM7AE70 Product Release / Press Release at

Additional information

MODM7AE70 Versions Available

MODM7AE70-100IR (RJ-45), MODM7AE70-200IR (10-pin Header)

Documents and Downloads

MODM7AE70 Docs


MODM7AE70 Datasheet 606.57 KB 598 downloads

The ARM® Cortex®-powered NetBurner Ethernet System-on-Module is a device containing...

Schematic: MOD-DEV-70 634.59 KB 155 downloads


    Development Kit

    NetBurner 3.0 Online Documentation


    SAM E70/S70/V70/V71 DataSheet 17.41 MB 53 downloads


    SAM E70/S70/V70/V71 Errata 233.79 KB 37 downloads


      Deployment Tools


      MTTTY Serial Terminal 21.83 KB 442 downloads


      IP Setup 858.77 KB 1233 downloads

      IPSetup is a Windows program used to configure NetBurner hardware through a network...

      Virtual COMM Port Driver (Windows XP - 10) 6.86 MB 1440 downloads

      Download the popular Virtual COMM Port Driver for use with NetBurner modules. Add...

        Application Notes


          There are no reviews yet.

          Be the first to review “ARM® Embedded System-on-Module MODM7AE70”

          Your email address will not be published. Required fields are marked *

          You may also like…