ARM® Embedded Development Kit for IoT MODM7AE70


Launch your product with our new ARM®-Powered embedded IoT development kit! It includes our MODM7AE70 ARM® platform hardware, custom RTOS, drivers, and libraries for SSL/TLS v1.2, networking and industrial protocols. Quickly and easily network-enable devices with 10/100 Ethernet, including those requiring digital, analog and serial control, and much more. Make life easy with our development tools, IDE, over 100 examples, and in-house support all for only $129!

Link to general information on our development kits and suite.

In Stock

SKU: NNDK-MODM7AE70LC-KIT Category: Tags: , , ,


Robust, Scalable and Easy to Use Embedded IoT Development Kits

This NetBurner embedded development kit features the ARM® Cortex® M7 System-on-Module (SOM) and is an IoT device containing everything needed to add industrial-quality network control, monitoring, and processing to nearly any device. The easy to use development suite contains everything needed to rapidly learn, code, test and deploy a industrial-quality embedded solution.


MODM7AE70 Datasheet 606.57 KB 598 downloads

The ARM® Cortex®-powered NetBurner Ethernet System-on-Module is a device containing...

Included in the Package

  • 1 ARM®-Powered NetBurner MODM7AE70 Embedded Platform Hardware
  • 1 IoT Development Kit Adapter board
  • 1 Ribbon Cable
  • 1 Quick Start Guide
  • 1 NNDK License Card with Platform Serial Number
  • 1 USB Cable
  • 1 DB9 Serial Cable
  • 1 Blue CAT5 Patch Cable
  • 1 Year of Software and Development Tool Updates
  • 6 Months of In-house Technical Support


  • Microchip®/Atmel® SAM E70 32-bit ARM Cortex-M7 300-MHz processor
  • Optimized and Embedded Real Time Operating System (RTOS)
  • Floating point unit (FPU) and DSP for high-precision, accelerated data processing
  • Low-power / High Energy Efficiency
  • Flexible memory, Memory Protection Unit (MPU) and system peripherals
  • 2MBytes embedded flash and 8MBytes SDRAM
  • CMOS image sensor interface
  • Watchdog Timer, Real-time Clock, and Temperature Sensor
  • Industrial temperature range (-40°C to 85°C)
  • Optional Wi-Fi available

Device Connectivity

  • 10/100 Mbps Ethernet with IEEE1588 PTP frames and 802.3az Energy-efficiency support
  • USB 2.0 Device and Mini Host High-speed (USBHS) at 480 Mbps
  • 12-bit ITU-R BT 601/656 Image Sensor Interface (ISI)
  • 8 UARTs, 3 TWIHS/I2C, 2 CAN, SPI
  • Quad I/O Serial Peripheral Interface (QSPI) interfacing
  • High-speed Multimedia Card Interface (HSMCI) (SDIO/SD Card/e.MMC)̶ Serial Synchronous Controller (SSC) with I2S and TDM support
  • 16-bit address and data bus with 5 chip selects
  • 14 analog-to-digital converters (ADC)
  • 12-bit 1Msps-per-channel Digital-to-Analog Controller (DAC) with differential and oversampling modes
  • 12 16-bit Pulse Width Modulators (PWM) with outputs
  • Up to 51 GPIO lines with external interrupt capability (edge- or level-sensitivity), debouncing, glitch filtering and on-die Series Resistor Termination

Want to read more on this product release?

Take a look at our latest article on the ARM MODM7AE70 release article.

More on the ARM® SAM E70 CPU SOM used in this NetBurner Embedded Development Kit can be found in its data sheet:

Ready to build products? Take a look at the standalone MODM7AE7 NetBurner ARM® platform hardware and volume pricing.

Additional information

Weight5 lbs

Documents and Downloads


SAM E70/S70/V70/V71 DataSheet 17.41 MB 53 downloads


SAM E70/S70/V70/V71 Errata 233.79 KB 37 downloads


MODM7AE70 Datasheet 606.57 KB 598 downloads

The ARM® Cortex®-powered NetBurner Ethernet System-on-Module is a device containing...

Schematic: MOD-DEV-70 634.59 KB 155 downloads




    There are no reviews yet.

    Be the first to review “ARM® Embedded Development Kit for IoT MODM7AE70”

    Your email address will not be published. Required fields are marked *

    You may also like…