Here is a list of all documented variables with links to the class documentation for each member:
- c -
- cacheSizeExp : Effs_Cfg
- callback : _edma_handle, _flexcan_handle, _lpspi_master_edma_handle, _lpspi_master_handle, _lpspi_slave_edma_handle, _lpspi_slave_handle
- channel : _edma_handle, NB::Wifi::driverStatusStruct
- channelPriority : _edma_channel_Preemption_config
- checksumOffload : InterfaceBlock
- chip_enable_access_ns : SRAM_Timing_Spec_t
- chip_select_setup_ns : SRAM_Timing_Spec_t
- cipher : NB::Wifi::driverStatusStruct
- CITER : _edma_tcd
- client_IPaddr : HTTP_Request
- clkCh : SAI_rxtx_cfg_t
- clkDiv : SSC_cfg_t
- clkGate : SAI_rxtx_cfg_t, SSC_rxtx_cfg_t
- clkMode : SEMC_cfg_t
- clkOut : SAI_rxtx_cfg_t, SSC_rxtx_cfg_t
- clkPin : SEMC_cfg_t
- clkPol : SAI_rxtx_cfg_t
- clkSrc : _flexcan_config, SAI_rxtx_cfg_t, SSC_rxtx_cfg_t
- clock_stop_acknowledge : mcanMODM7AE70::mcan_config
- clock_stop_request : mcanMODM7AE70::mcan_config
- colAddrWidth : SEMC_cfg_t
- columnAddressWidth : _FlexSPIConfig
- Command_Mask : dspiDriverStruct, QSPI_Record, spiDriverStruct
- commandInterval : _FlexSPIConfig
- configCmdArgs : _FlexSPIConfig
- configCmdEnable : _FlexSPIConfig
- configCmdSeqs : _FlexSPIConfig
- configFlags : _lpspi_transfer
- configModeType : _FlexSPIConfig
- connack : MQTT::PacketInfo::Msg
- connected : NB::Wifi::driverStatusStruct
- ConsecutiveSecs : IEEE1588Timer
- content_length : HTTP_Request
- controllerMiscOption : _FlexSPIConfig
- cpha : _lpspi_master_config, _lpspi_slave_config
- cpol : _lpspi_master_config, _lpspi_slave_config
- CR0 : SEMC_cfg_t
- CR1 : SEMC_cfg_t
- CR2 : SEMC_cfg_t
- cs_hold_min : SEMC_cfg_t
- cs_min_intv : SEMC_cfg_t
- cs_setup : SEMC_cfg_t
- csHoldTime : _FlexSPIConfig
- csPadSettingOverride : _FlexSPIConfig
- csPin : SEMC_cfg_t
- CSR : _edma_tcd
- csReturnToInactive : dspiDriverStruct, spiDriverStruct
- csSetupTime : _FlexSPIConfig
- csState : dspiDMAStruct
- csum : Effs_Cfg
- csums : PartitionTable
- CTRL : ENC_Type
- CTRL2 : ENC_Type
- ctx : MQTT::TopicHandler
