NetBurner SBL2e Devices network-enable serial, analog, or digital I/O devices out of the box - no programming or development is required. The included virtual COM port Windows utility enables you to easily access serial devices located on a remote NetBurner device as if they were plugged into your own computer. The hardware is pre-programmed to convert your serial data to Ethernet, enabling communication with the serial device over a network or the Internet.
Not the right device?
- 10/100Mbps Ethernet
- DB9 connector interface
- Up to three UARTs (development kit required)
In addition to the platform hardware, development kits include software and technical support.
What makes NetBurner development kits different?
NOTE: The SBL2e series development kits do not include a graphical debugger.
To learn about the standard development kit features and software, please click on the buttons below.Development kit price
|SBL2e Development Kits include the SBL2e-ADPT-100CR development board|
The NetBurner Single Chip platform is an extremely cost effective platform for simple applications, but this comes at a cost in features and development time. Unlike the standard NNDK applications where one can expect to add significant features to the examples, the factory application and bundled examples are close to the limit of what can be done with the platform. You can modify the applications, but if you add features also expect to remove features. See table below to determine whether or not the SBL2e will be the most cost effective device for your application.
|SBL2e with the NetBurner Single Chip Stack||SB70LC with the NetBurner Standard Stack|
|Best suited for||Simple applications / high volumes||Simple and complex applications / all volumes|
|Unit cost||Lower unit cost with single chip solution, but very limited RAM.||Higher unit cost, but significantly more RAM and other resources.|
|Application type||Simple applications which take into account the additional costs due to longer development times required to optimize code for smaller memory footprint.||Good choice for any size application. Very fast development time.|
|Target volumes||Simple applications should have a volume of at least 1K+ units. Multi-function applications should have a volume of at least 10K+ units.||All volumes|
|Security (optional)||Not available||Optional, includes: SSL, SSH, HTTPS, AES|
|Flash file system||Not available||Included|
|Integrated debugger||Not available||Included|
|SNMP (optional)||Not available||Optional|
|Flash updates||UDP and Serial||TCP, UDP, FTP and Serial|
|TCP sockets||Maximum of 4, including listening sockets.||Maximum of 32, including listening sockets.|
|Tasks||Up to 3 user tasks.||64+|
|Coding||C/C++ coding||C/C++ code with standard library support|