Ethernet Core Modules

with High-Performance Connectivity Options

Add Ethernet connectivity to an existing product, or use it as your product’s core processor

The NetBurner Ethernet Core Module is a device containing everything needed for design engineers to add network control and to monitor a company's communications assets. For a very low price point, this module solves the problem of network-enabling devices with 10/100 Ethernet, including those requiring digital, analog and serial control.

Several modules are footprint and API compatible, enabling migration with minimal impact on the mother board hardware design. The ColdFire processor I/O, are routed directly from the processor to the module I/O pins. This makes the Freescale Semiconductor ColdFire Users Manual a complete reference to internal peripheral and I/O configuration registers. Given the high performance of the core processor, external bus, and serial interfaces, the module series is well suited to be the core processor of an entire product. Adding peripherals is as simple as adding them to the bus and configuring the chip select to address the new peripheral. The serial ports offer high bandwidth and a rich feature set. The serial ports have partially full and partially empty interrupt capability, allowing the processor to service the ports with no interruption in data flow.

Choose your core module

Part # Ver. MHz RAM Flash Interface Digital
I/O
Flash
card
UART
(hwhs)
Data
Bus
ADC DAC PWM I2C CAN SPI Tmr Etc
MOD5441X 100
200
250 64MB 32MB Two 50-pin
connectors
42 On Board 8 TTL
(2)
16 8 2 5 4 2 3 4 1-Wire
NANO54415 200 250 64MB 8MB 52-pin Mini
PCI express
connector
30 Yes 8 TTL
(3)
0 6 2 8 4 2 3 4 1-Wire
SSI
MOD5270 100
200
147.5 8MB 512KB Two 50-pin
connectors
47 Ready 3 TTL
(3)
32 0 0 0 1 0 1 7  
MOD5234 100
200
1588
147.5 8MB 2MB Two 50-pin
connectors
49 Ready 3 TTL
(2)
16 0 0 0 1 1 1 5 eTPU
MOD5213 100 66 32KB 256KB Two 20-pin
connectors
33   3 TTL
(1)
0 8 0 8 1 1 1 4 (no
ethernet)