APP NAME: SBL2EX Factory Application ========================================================================================= App Version: 1.17 NNDK Version: 2.5.3 T012 Compile Date: 2011.10.24 Notes: Modified Standard Release - Added the "Learn UDP reply port" option ----------------------------------------------------------------------------------------- App Version: 1.16 NNDK Version: 2.5.3 T002 Compile Date: 2011.04.26 Notes: Modified Standard Release - Fixed issue with ARP over UDP when an attempted outgoing connection is made before the target device is connected to the network ----------------------------------------------------------------------------------------- App Version: 1.15 NNDK Version: 2.5.2 Compile Date: 2011.01.26 Notes: Modified Standard Release - Fixed listening port error in dual-port mode after a connection time- out ----------------------------------------------------------------------------------------- App Version: 1.14 NNDK Version: 2.5.0 Compile Date: 2010.11.23 Notes: Modified Standard Release - Fixed outgoing TCP/UDP connection port default duplication when used in dual serial mode; port 0 and 1 now defaults to 1001 and 1000, respectively - Fixed AT command serial port configuration for data bits - options for 5 and 6 data bits were missing - Updated AT command set options for serial port configuration: Serial mode options - added disable option for Port 0 Port 0 = R/D/O (RS-232, debug, and disabled/off) Port 1 = R (RS-232 only) Flow control options - added hardware option for Port 1 Port 0 = N/S [None, software (XON/XOFF)] Port 1 = N/S/H [None, software (XON/XOFF), hardware (RTS/CTS)] Outgoing connection condition options - added DSR pin 6 assertion option for Port 1 Port 0 = N/P/R (Never, on power-up, upon rx'd serial data) Port 1 = N/P/R/D (Never, on power-up, upon rx'd serial data, when DSR pin 6 is asserted) ----------------------------------------------------------------------------------------- App Version: 1.13 NNDK Version: 2.5.0 Compile Date: 2010.11.19 Notes: Modified Standard Release - Fixed outgoing connection issue with the idle time-out and failed retry time-out input name tags being reversed ----------------------------------------------------------------------------------------- App Version: 1.12 NNDK Version: 2.5.0 Compile Date: 2010.11.08 Notes: Modified Standard Release - Added support to toggle between single port serial-to-Ethernet mode (port 1 only; port 0 disabled or used for debug) and dual port serial- to-Ethernet mode - Added new option for port 1 on network web page to make outgoing connections when the DSR pin (DB9 pin 6) is asserted - Removed "Debug RS-232 TX (115K baud)" option on serial web page for port 1 DTR pin 4; debug mode now configurable via "Data port setting" for port 0 - Fixed behavior of DHCP/static mode toggling via network web page; ensures that the "Static Settings" column gets cleared when DHCP addressing mode is selected. "Addressing Mode" will always override the "Device IP address" text box unless "Static" is selected and no device IP address is entered, resulting in automatic reversion to DHCP upon submit update - Fixed page load time-out when switching between DHCP and static IP addresses through the network web page - Fixed DNS to work with leading spaces - Extended the time to wait for DHCP address before outputting the failure message via debug port from 5 to 6 seconds; a message indicating that DHCP acquisition failed would sometimes appear despite being successful ----------------------------------------------------------------------------------------- App Version: 1.11 NNDK Version: 2.4 RC3 Compile Date: 2010.09.10 Notes: Standard Release - Increased incoming TCP idle timeout default value from 30 to 60 seconds - Decreased outgoing TCP retry timeout default value from 60 to 10 seconds - Changed custom baud rate default value from 9600 to 0 bps (115,200 bps selectable by default) - Outgoing TCP connect name default is “(Enter IP address)” instead of blank - UDP mode settings are removed from custom packetization category into its own category - Serial data port setting for port 1 is now unchangeable: port 0 and 1 will always be debug and RS-232 data, respectively ----------------------------------------------------------------------------------------- App Version: 1.10 NNDK Version: 2.4 RC3 Compile Date: 2010.08.25 Notes: Standard Beta Release - Updated web page interface ----------------------------------------------------------------------------------------- App Version: 1.00 NNDK Version: 2.4 RC3 Compile Date: 2010.08.25 Notes: Initial Beta Release -----------------------------------------------------------------------------------------