AM29LV160B.h

/* Revision: 3.3.8 */
 
/******************************************************************************
* Copyright 1998-2022 NetBurner, Inc.  ALL RIGHTS RESERVED
*
*    Permission is hereby granted to purchasers of NetBurner Hardware to use or
*    modify this computer program for any use as long as the resultant program
*    is only executed on NetBurner provided hardware.
*
*    No other rights to use this program or its derivatives in part or in
*    whole are granted.
*
*    It may be possible to license this or other NetBurner software for use on
*    non-NetBurner Hardware. Contact [email protected] for more information.
*
*    NetBurner makes no representation or warranties with respect to the
*    performance of this computer program, and specifically disclaims any
*    responsibility for any damages, special or consequential, connected with
*    the use of this program.
*
* NetBurner
* 16855 W Bernardo Dr
* San Diego, CA 92127
* www.netburner.com
******************************************************************************/
 
/*------------------------------------------------------------------------------
 * EFFS-STD configuration file for Spansion AM29LV160B flash chip.  This file is
 * part of an example that allocates 512kB of flash space to the file system,
 * and the rest to the application.
 *
 * Note:  The AM29LV160B is identical to the Spansion S29AL016D.
 *
 * To modify the amount of space allocated to the file system:
 *
 * 1. Change the definition in this file:  #define FS_SIZE ( 1024 * 1024 )
 * 2. Change the compcode memory address range for the application in your
 *    NBEclipse project settings so that the end of the application space does
 *    not exceed the start of the file system space.  See the EFFS Programmer's
 *    Guide for details, and the header comments in main.cpp of this example
 *    on how to make the changes in the NBEclipse project.
 * 3. Be sure to add the /nburn/platform/<platform>/original/lib/libStdFFile.a library
 *    to your NBEclipse project C/C++ build linker library options.  See the header
 *    comments in main.cpp for this example on how to add the library in the
 *    NBEclipse project.
 *----------------------------------------------------------------------------*/
 
#ifndef _ONCHIPFLASH_H_
#define _ONCHIPFLASH_H_
 
#include "file/fsf.h"
#include "basictypes.h"
#include "hal.h"
 
extern int fs_phy_OnChipFlash(FS_FLASH *flash);
 
#define FLASH_NAME "S29AL016/AMDLV160"
 
#define FS_FLASHBASE (0xFFC00000)
 
#define BLOCKSIZE (64 * 1024)    // Use only the 64k sectors
#define SECTORSIZE (16 * 1024)   // 4 sectors per block
#define SECTORPERBLOCK (BLOCKSIZE / SECTORSIZE)
 
/*
 * Specify the total amount of flash memory in the system, and the amount
 * allocated to be used by the file system (the rest is used by the
 * application).
 */
#define FLASH_SIZE \
    (2 * 1024 * 1024)   // Size of total flash in the
                        //    system, 2MB
#define FS_SIZE \
    (512 * 1024)   // Amount allocated to file
                   //    system, 512kB
//#define FS_SIZE      (          1024 * 1024 )   // Amount allocated to file
//    system, 1MB
#define FIRST_ADDR \
    (FLASH_SIZE - FS_SIZE)   // First file system address to
                             //    use in the flash
#define BLOCKSTART \
    (2)   // First block where file system
          //    data starts (first 2
          //    blocks are DESCRIPTORS)
 
/*
 * Descriptor Blocks:
 * These blocks contain critical information about the file system, block
 * allocation, wear information, and file/directory information.  At least two
 * descriptor blocks must be included in the system, which can be erased
 * independently.  An optional descriptor write cache may be configured which
 * improves the performance of the file system.  Please refer to the EFFS-STD
 * implementation guide for additional information.
 */
#define DESCSIZE (8 * 1024)   // Size of one descriptor
#define DESCBLOCKSTART (0)    // Position of first descriptor
#define DESCBLOCKEND (1)      // Position of last descriptor
#define DESCCACHE (2048)
 
#endif /* _ONCHIPFLASH_H_ */