 |
|
This section is intended for SB series users who are using the SB factory application. If you are using a Serial to Ethernet Network Development Kit (NNDK) these utilities are included with the kit.
● To quickly and easily configure your SB72 device, download the latest version of the IPSetup program located in the NetBurner Utilities section below.
● To update your SB to the latest revision of the SB Serial to Ethernet application, download the AutoUpdate utility in the NetBurner Utilities, and the latest revision of the SBXX application program on the specific serial to Ethernet board or device product page. For example, go to the SB72 product page to find its version of the SB72 application program in the software section.
● Download the latest revision of the SBXX Ethernet to Serial Application Program. You can find the serial application program on the product page specific to your SB series device. All the SB device pages can be found on the Serial to Ethernet web page. After downloading the application, run AutoUpdate to reprogram the flash memory of the SBXX.
