Device Network Settings
SB70 Device address
DHCP
Static settings
Device net mask
Device gateway
DNS server
Device Name (for DHCP)
Device Connection Settings
Listening for connections
Listen On Port:
Timeout and disconnect after:
Seconds of inactivity
Allow new connection if the existing connection has been idle for
Seconds
Making outgoing connections:
Don't initiate connections
Connect on powerup
Connect when receiving serial data
Connect On Port:
To:
Timeout and disconnect after:
Seconds of inactivity
Retry failed outgoing connections after:
Seconds
Serial Data Port Settings
Serial Data Port:
RS-232 (or TTL) on port 1
RS-232 (or TTL) on port 0
RS-485 Half Duplex on port 0
RS-485 Full Duplex on port 0
Data Baud Rate
115200
57600
38400
19200
9600
4800
2400
1200
Data Bits
8
7
6
5
Data Parity
None
Odd
Even
Stop Bits
1
2
Flow Control:
None
Xon/Xoff
RTS/CTS
Firmware Version: SB70 V1.1 Apr 12 2002 10:17:58
(Note: this is a non-operational copy of the configuration page)
