The CKv2e is a low-cost n network module that network-enables your product with 10/100 Ethernet, two UARTs, analog to digital inputs, general purpose I/O and I2C.
 |
The SBL2e uses a CKV2e chip, which may be soldered directly on to your circuit board. This chip provides a three UARTs, a total of 8 analog to digital channels, SPI, and Interrupt inputs. |
The CKV2e Network Development kit enables you to create your own custom appliations for both the CKV2e Chip. The development kit includes all the hardware, software and tools you need to start writing application code for your product or idea immediately. Note that this development kit uses the
NetBurner Single Chip TCP/IP Stack, rather than the
NetBurner Standard TCP/IP Stack.
Kit Contents
- Quick start guide
- SBL2E-200IR Module (with onboard CKV2e processor)
- carrier board with RS-232 level shifters
- USB Cable (for power and/or serial communication)
- Standard Ethernet Cable (blue)
- Cross-wired Ethernet Cable (red)
- Standard Serial Cable
- Documentation and development software on CD-ROM
- RJ-45 Ethernet Jack
- Three months of technical support
Software and Tools
The kit includes the Integrated Development Environment, uC/OS Real-Time Operating System, NetBurner Single Chip TCP/IP Stack, ANSII C/C++ Compiler and Linker, Assembler, Code Update and Deployment Tools. For a complete listing of software and protocols included with the kit, please see the NetBurner
Single Chip Network Platform Software and Protocols datasheet.
Carrier Board Details
The hardware features on the SBL2e carrier board help you evaluate your peripheral connectivity (UART, A/D inputs, digital I/O, 10/100 Ethernet) and to configure the SBL2e. DB9 connectors use the onboard RS-232 level shifter enable devices to quickly connect via the serial ports. Extension headers make it easy to connect to a daughterboard or wrapping board for your specific application. The USB port can be used to monitor serial port 0 data and/or to power the board.
