Home > Products > Core Modules > MOD5213

MOD5213
The fastest way to develop an embedded product.
The NetBurner Embedded Core Module is a device containing everything needed for design engineers to develop an embedded product. The MOD5213 has a rich set of peripherals making it ideal for both communications and control applications. This small form factor module is targeted at the high performance extended temperature low power market.

Core Module Information


● MOD5213 Datasheet
● MOD5213 Mechanical Diagram
User Guides
● MOD5213 Programmers
Guide
● Freescale ColdFire 5213
Manual
● Freescale Website
● MOD5213 Pinouts
Application Notes
● MCF5213 Microcontroller Family Hardware Specification
● MOD5213 Development Board (MOD-DEV-40)Configuration and Connector Descriptions
● MOD5213 Module Schematic
● MOD5213 Development Board (MOD-DEV-40) Schematic
● NNDK 1.98 RC5 Compile Error for bsp.o
● MOD5213 Periodic Interrupt Timer (PIT) App Note
● MOD5213 PWM
● MOD5213 GPIO Programming Application Note
● PIN I/O Class (Requires NNDK 1.99 Beta 5 or later)
● MOD5213 Interrupt Controller Application Note
● MOD5213 Making an X Khz square wave with the Mod5213 timer
● RS232/CAN Transceiver Application Note
Updates
● MOD5213 Development Kit Users Manual
Related Products
● Embedded Development Kit

Overview


Available in a 40 pin DIP, the MOD5213 boasts 66MHz of performance on a 32 bit ColdFire platform. The Mod5213 development kit also includes all the tools necessary to complete your embedded design, including a world class IDE, Graphical Debugger, and Real Time Operating System.
Real-time high performance Embedded Systems
The MOD5213 is based on the Version 2 ColdFire core. Equipped with a full featured real time operating system the MOD5213 is ideal for any deterministic application. Real time capability, extended temperature operation, and low power features allow the MOD5213 to operate in the harshest environment.

Small Form Factor
The MOD5213 is ideal for rapid prototyping due to its industry standard 40 pin DIP form factor. Installed in a Socket or soldered straight to the board, the MOD5213 can fit into almost any space constrained enclosure.

Hardware Specifications
 

* ColdFire® V2 Core
* Temperature range: -40ºC to +85ºC
* 63 MIPS @ 66 MHz
* MAC Module and HW Divide
* Low-power optimization
* Standard 40-pin DIP
* 32 KB SRAM
* 256 KB Flash
* CAN 2.0B controller with 16 message buffers
* Three UARTs with DMA capability
* Queued serial peripheral interface (QSPI)
* Inter-integrated circuit (I2C) bus controller
* Four 32-bit timer channels with DMA
capability
* Four 16-bit timer channels with
capture/compare/PWM
* 4-channel 16-bit/8-channel 8-bit PWM
generator
* Two periodic interrupt timers (PITs)
* 4-channel DMA controller
* 8-channel 12-bit ADC
* Up to 33 general-purpose I/O
* System integration (PLL, SW watchdog)
* PIN Dimensions: 1.9" x 0.6"
PCB Dimensions: 2.3" x 0.7"
* 4.5V to 7.5V input to integrated 3.3V regulator
* 3.3V I/O (not 5V tolerant)






rohs

Pricing
Model
1-99
100-999
1,000-9,999
10,000+
Purchase Product
MOD5213-100IR
$39

$33

$31

$26

Buy now!

 
 

network development kit
Home | Getting Started | Demos | Products | Support | Company | Store | Site Map
©2007 NetBurner, Inc. All Rights Reserved. Privacy Policy | Terms of Use