Overview
The PK70 combines the design of a finished product, the flexibility of a network module, and the power of the NetBurner development suite into a ready to use platform for use in both prototype or production. The primary advantage of the PK70 is that the electronics are in a professional grade enclosure with a power supply.
How to use the PK70 in Your Product
The PK70 can be customized to add additional functionality with one of the standard NetBurner Personality Blades, or you can create your own. The Personality Blades are installed inside the PK70 enclosure. For example, the NBPKBM-100CR Multi-I/O Personality Blade includes analog-to-digital, digital-to-analog and general purpose I/O.
Hardware Specifications
* 147MHz ColdFire 5270 32-bit processor
* 4MB Flash
* 8MB SDRAM
* 10/100 Ethernet
* SD Flash card interface
* DB9 RS-232 serial port
* 2 Ethernet status LEDs, plus 2 user
-programmable bicolor LEDs
* Power supply
* Temp range: 0 - 70 degrees C
* RoHS compliant
* Expansion connector for Personality Blades
- 8-bit data bus
- 3 Chip selects
- 3 Interrupt inputs
- I2C
- SPI
- UART
- 2 Timer inputs, 1 Timer output
- 5VDC @ 1A, 3.3VDC @ 750mA
Standard NetBurner Personality Blades
Quickly and easily add additional functionality to a NetBurner PK70 device by installing a Standard NetBurner Personality Blade. The Personality Blade you will use depends on your particular application requirements. Each Personality Blade Board has a unique feature set. For example, the Multi-Function Blade Board includes analog-to-digital inputs.
(View Image) |
Multi-I/O Blade Board (NBPKBM-100CR)
The NetBurner Multi-Function Blade Board quickly adds analog-to-digital inputs, digital-to-analog outputs, and 16 digital I/O lines to the NetBurner PK70.
Features
* 8 12-bit A/D channels with programmable voltage range of +/-10V, 0 to 10V, +/-5V and 0 to 5V
* 16 digital I/O lines, jumper selectable to 3.3 or 5V
* Two 16 bit 0-5V DAC outputs
|
(View Image) |
Programmable Xilinx Digital I/O Blade Board (NBPKBD-100CR)
The NetBurner Digital Blade Board is the easiest way to add 32 channels of digital I/O and a Xilinx CPLD to the NetBurner PK70.
Features
* 32 ch digital I/O board
* Each channel is individually programmable to be Hi, Low, Hiz, or input
* Each channel has its own 74HCT125 driver for 20Ma of drive
* Jumper selectable to be 3.3 or 5V out, and 5V tolerant input
* Includes programmable Xilinx CPLD
|
(View Image) |
Quad UART Blade Board (NBPKBU-232CR)
The NetBurner Quad UART Blade board adds 4 RS-232 UARTS to the PK70. This board includes NetBurner DB37 to 4x DB9 adapter cable.
|
(View Image) |
Prototype Blade Board (NBPKBP-100CR)
Create a custom NetBurner Blade Board for the NetBurner PK70 with the NetBurner Prototype Blade Board.
Features
* Prototype area
* 40-pin dual row right angle header
* DB-37 Female Connector |
The PK70 Development Kit (NNDK-NBPK70EX-KIT)
The PK70 Development Kit includes all the tools necessary to complete your embedded network design, including a world class IDE, Graphical Debugger, Real Time Operating System, and TCP/IP Stack. NOTE: The NetBurner PK70 Development kit does not include a Personality Blade Board.
NNDK-NBPK70EX-KIT
NBPK70EX-100CR
NBPKBM-100CR
NBPKBD-100CR
NBPKBU-232CR
NBPKBP-100CR
$299
$199
$99
$59
$99
$25
$189
$79
$49
$79
$25
$149
$69
$25
$54
$25
