
Innovative Software/Firmware Products, Inc. specializes in software, hardware and firmware development for embedded products. Typical designs include: embedded hardware/firmware, FPGA and FPGA interface logic as well as PC based software for communicating with the embedded device. ISFP, Inc. works closely with clients and provides consulting, quick turn proof of concept prototyping as well as complete solutions.
ISFP, Inc. has a wide range of experience in 8/16/32 bit micro controller hardware designs, designs with FPGAs and C/C++ firmware for embedded systems and Windows based products.
Bill Bracken
Tel: +1 714-693-0447
billb@isfpinc.com
Innovative Software/Firmware Products, Inc.
5255 Vista Montana
Yorba Linda, Ca. 92886
Ph: 714.693.0447, Cell: 714.287.8827, Fax: 714.693.0447
Stratus Engineering specializes in electronic design for embedded systems including analog and digital hardware design, firmware development, CPLD/FPGA/ASIC design, power supply design and electronic packaging. Our wide range of consumer and industrial application expertise includes high-speed microprocessor design, networking and communications, consumer audio, AC/DC servo and stepper motor control, DSP, instrumentation and data acquisition, hot-swappable Compact PCI and VME boards. Stratus engineering provides services ranging from supplemental engineering support to full turnkey design for contract manufacturing.
Bob Kirstein
San Diego, CA
858-663-1841
rkirstein@stratusenginering.com
Hardware, software and product designs. Indepth experience with standard modules and complete custom processor designs. Our extensive knowledge of protocols, real-time analysis, error detection. web interfaces, QOS metrics, and transport routing (Ethernet to/from Serial ports), provide an effective and attractive time to market solution.
SoftwareFlair Inc.
www.softwareflair.com
530.268.3809 (Tel & Fax)
530.913.9894 (Cell)
Company Confidential
Tilco specializes in microcontroller based hardware design and software development. We have over 15 years experience designing networked controllers for Ethernet, CAN and RS485 busses, Internet enabled devices with remote monitoring and control, and many building security and access control products.
Tilco
Toronto, Ontario
416 512-2904
info@tilco-design.com
tda has 30 years experience in a wide variety of embedded projects. We strive to create unique, creative and affordable solutions to problems. Our experience in Control systems, Data Acquisition systems, serial communications, 8- and 16-bit microprocessors, rapid prototyping, sensors, device drivers, and general consulting will help you quickly develop outstanding products.
We also have a wide network of skilled associates. This includes all aspects of electronic design and systems, machining, prototyping of most any product, and production. We also support field operations for Data Acquisition and other projects. These include flight tests, on-site control of custom sensors, and any other types of field work.
Bandit Gangwere
Box 625
Sandia Park, NM 87047
bandit@cruzio.com
505-228-8197 (c)
www.patca.org and search for me
The software engineers at Syncor Systems, Inc. have been doing embedded development for over 20 years. We specialize in C++ on the NetBurner platform. We have particular expertise in laboratory instrumentation, radar systems and SCPI parsers. Our typical projects involve A/Ds, D/As, PLLs, GPIO, LCD, EEPROMs, FPGAs, interrupts, multi-tasking, serial port and Ethernet support. We also develop PC based GUI software in C++/C# that communicates with the embedded products over Ethernet. We also have expertise in providing automated test support via SCPI programmable instruments including spectrum analyzers, signal generators, and power meters.
We have an established partnership with several firms to provide the full spectrum of product development skills that can make your ideas into off the shelf products. As a team we can provide expertise in: systems analysis, product design, digital circuit design, FPGA/DSP/CPLD/ASIC Design, CAD, PWB, packaging, thermal analysis, and more.
Syncor Systems, Inc.
Software and Technology Team
25500 Hawthorne Blvd.
STE 1158
Torrance, CA 90505
Tod Gentille
(310) 373-8363 X12
To see example application notes written by Swateam please visit our technical documents section.
The Baring Forge NetBurner engineers have been doing both large and small scale embedded products for over 10 years. Our specialty is the NetBurner platform, but we also have extensive experience in all areas of embedded software, ranging from custom drivers, high performance network stacks, custom boot code, and specialized remote monitoring web interfaces. If you need it done, we have the experience and background to make it happen. In addition, we're able to provide you the PC based tooling you need to interface and manage your targets. Quality documentation (design, requirements, user guides) is part of our normal workflow, and can be tailored to your specific needs.
Our team will work with you to get things done. If you're a small business owner looking to bootstrap you're product in, or an established business looking for a robust turnkey platform, we'll work with you to get you the product you need.
Baring Forge
64404 NE 179th St.
Gold Bar, WA 98251
Thomas Taranowski
tom@baringforge.com
(425) 770-8195
Pacific Research has over 25 years of experience in designing industrial and consumer electronic products. Our hardware design skills include analog, digital, mixed signal and embedded microcontrollers, including NetBurner modules. Our software skills include assembly, C/C++, and Pascal for both embedded and Windows applications. We can provide design support beginning with the initial concept, product packaging, circuit board layout, prototypes, software and testing. Once the design is finished, we can also help to get the product into production.
Some of our recent projects include; VoIP, RTP for Embedded, porting speech codecs for embedded application, XML phraser for embedded applications, vehicle tracking system, UV disinfection system monitoring, reverse osmosis control systems, including many others. We have also developed electronic device that were built into running shoes.
Pacific Research
P.O. Box 210
Shingle Springs, CA 95682
Tel: 530.672.9053 / 800.975.4024
Fax: 530.672.8749
Gregg Herzog
pacres@pacres.com